Under attack? Emergency incident response, remote or on-site.Get help now →Call (360) 524-3477

How to Export Files from FileCabinet CS (and When to Use a Bulk Export Instead)

The simplest way to export FileCabinet CS documents is the one Thomson Reuters built in: File > Send to > File. It costs nothing, it is already installed, and for a handful of drawers it does the job. This guide walks through it step by step, following Thomson Reuters’ own help articles, then covers where it struggles when a whole firm has to move and what to check before you start.

The timing matters. Thomson Reuters ends support for FileCabinet CS on December 31, 2027, so most firms will export their archive sometime in the next year. If you are still deciding where your documents should end up, our FileCabinet CS retirement guide covers that bigger decision. This article is about the export itself.

What format your files will come out in

Before you click anything, it helps to know what Send to > File produces. According to Thomson Reuters, the output depends on how each document got into FileCabinet in the first place:

  • Printed to FileCabinet from UltraTax CS or another CS Professional Suite application, or through the FileCabinet print driver: exported as PDF.
  • Added with Image > Copy from File: exported in its original format, such as Word, Excel or PDF.
  • Scanned with Image > Scan: exported as PNG image files, unless you tell FileCabinet to convert images to PDF (step 6 below).
  • Embedded documents: exported as their original file type. Thomson Reuters notes that non-PDF embedded files keep their native format even when you ask for PDFs.

How to export a drawer with Send to > File

These steps follow Thomson Reuters’ help article on exporting data from FileCabinet CS. Menu names can differ slightly between versions.

  1. Select the drawer. In the Folders window, click the client drawer you want to export.
  2. Open the export dialog. Choose File > Send to > File. You can also click the arrow beside the Send to Email button on the toolbar and choose File.
  3. Check the destination. The Destination field shows where the files will be saved. Use Modify Destination to pick a different folder. If you run FileCabinet through Virtual Office CS, you can browse to a folder on your own office network from here.
  4. Pick the documents. Highlight a document in the left pane and choose Select to move it to the right. To take the whole drawer, highlight the drawer name itself and choose Select.
  5. Name the files so you can tell them apart. In the File name section, mark Drawer ID to add the drawer’s ID to each file name. Drawer Name, Folder and Creation Date can be added the same way. These boxes don’t apply to custom file names or embedded document names.
  6. Set the output options. Leave Combine documents into single PDF file unmarked if you want one file per document. Mark Export Images as Adobe Acrobat (.PDF) Files to save scans as PDFs. For large exports, Thomson Reuters recommends marking Export documents to PDF files as images to avoid formatting problems, which makes the files bigger. If you mark Include Annotations, highlights and stamps become a permanent part of each PDF, so decide on that before a long run.
  7. Choose OK. FileCabinet writes the files to the destination folder. Then select the next drawer and repeat.

Exporting several drawers together with a drawer family

By default, the dialog lists documents from the selected drawer only. Linking drawers into a family makes the other members’ documents appear in the same Send to > File dialog, so you can pick from several drawers in one pass. To create a family:

  1. Select one of the drawers in the Folders window and choose File > Drawer Properties.
  2. Choose Select Family, then Add, and type a family name.
  3. Move each drawer you want from Drawers available to assign to Drawers to assign with the Select button. The current drawer is included automatically.
  4. Choose OK.

A family needs at least two drawers and can’t mix drawers from different data locations. When you export from one, mark Drawer ID so each file carries its client’s ID. Thomson Reuters also advises against linking all of your drawers together for an export, because big exports are resource-intensive. Its suggestion is a test export, with your IT professional, to settle the options and how many drawers to run at a time.

Where Send to > File falls short

For a few drawers, the built-in export is fine. Across a whole firm, these limits start to cost real time:

  • One drawer, or one family, per pass. Families help, but with Thomson Reuters recommending against linking everything, a firm with hundreds of client drawers is still looking at hundreds of runs through the same dialog.
  • Slow, and prone to timeouts, over Virtual Office CS. In Virtual Office the export runs on Thomson Reuters’ servers and writes to your network over the remote session. Large drawers can stall that session or drop it partway through, and then someone has to work out which files made it.
  • The drawer’s folder structure stays behind. Selected documents land together in the one destination folder. The Folder checkbox only adds the folder name to each file name, and Thomson Reuters says that keeping documents separated by folder takes a separate export for each folder. Rebuilding each client’s folders by hand is slow, fiddly work.
  • Scans come out as PNG images. Unless you mark the PDF option, scanned documents export as PNG files, which are awkward to search and to file alongside everything else.
  • No proof that all of it came across. Send to > File doesn’t give you a count, a checksum or a list of documents it skipped. Confirming that a drawer is complete means comparing counts yourself, one drawer at a time.

Pre-export checklist

Whether you export in-house or hire someone, these five steps head off most of the problems we see.

  1. Inventory the archive. List each data location, how many drawers it holds and roughly how many documents. Note which clients are active, which are closed, and any drawers that are unusually large, since those are the ones most likely to stall.
  2. Agree on retention before anyone starts. Decide which closed clients and older years have to be kept, and for how long. If some drawers can be left behind, write that decision down so it is on record later.
  3. Plan the destination folders. Settle the layout before the first export, for example one folder per client named with the drawer ID and client name, with subfolders that match the FileCabinet folders you use. Choose where the archive will live (a file server, SharePoint or your new document system’s import folder), restrict access to it, since these are tax and identity records, and check for disk space, because PDFs exported as images get large.
  4. Run a test drawer. Pick a mid-sized drawer with a mix of printed returns, scans, Office files and e-mail. Export it with the settings you plan to use, open a sample of each file type and time the run. Multiply that time by your drawer count for a realistic estimate.
  5. Verify counts as you go. For each drawer, compare the documents FileCabinet lists with the files in the destination folder, and log the result with the date and who ran it. A shared spreadsheet is enough. Fix any gap the same day, while that drawer is still fresh.

When a bulk export makes more sense

Send to > File is a reasonable choice for a small practice with a few dozen drawers and some patience. A bulk export is worth a look when:

  • your firm has hundreds or thousands of client drawers;
  • you reach FileCabinet through Virtual Office CS and large drawers keep timing out;
  • your next document system expects each client’s folders intact;
  • you want written evidence, for your retention files, that the export is complete;
  • nobody on staff can spare weeks of clicking through drawers before support ends.

TekBryte’s FileCabinet CS bulk export handles the whole firm as one job. All of your drawers come out at once, in the same drawer and folder structure you had in FileCabinet, with annotations and drawer notes carried over so no information is left behind. We give each exported file a SHA-256 hash, match it 1:1 against FileCabinet and hand you a written report of the result. If FileCabinet’s own tools miss any files, that check pinpoints them and we export them separately. Virtual Office timeouts never come into it, and your data stays on your firm’s computer throughout. You pay one flat fee, and because the work is 100% remote, firms in any state can use it.

Whichever route you take, start early. January through April is spoken for at most firms, so the quiet months left before the end of 2027 go quickly. An inventory and one test drawer this quarter will tell you which approach fits.

Too many drawers to export one at a time?

Tell us roughly how many clients you have, and a free export assessment will size the job and give you a fixed price.

TekBryte FileCabinet Recover iconExports run on TekBryte FileCabinet Recover, our own bulk-export software.

How the bulk export worksCall (360) 524-3477